|
The IMAGO 500
is a process and program controller with up to 8 controller channels
or 4 program channels. The instrument is built to the format 144mm x
130mm for a standard 92mm x 92mm panel cut-out and a mounting depth of
170mm. The display is a 5" color graphics display (27
colors).
The layout of the screen templates can be individually adapted and
adjusted. Two freely configurable screen templates make it possible to
customize the placing of texts, process values, background pictures
and icons.
The controller features up to 8 analog inputs and 6 logic inputs, as
well as six expansion slots for switched or analog outputs. Four of
these slots can be used alternatively for analog inputs or outputs. A
setup program is available for conveniently configuring the instrument
from a PC. Linearization tables for the usual transducers are stored
within the controller. In addition, four customer-specific
linearization tables can be programmed. A math and logic module can be
used to adapt the instrument to a very wide range of control
tasks.
Two serial interfaces, RS422/485 or Profibus-DP, serve to integrate
the controller into a data network. Modules can be retrofitted quite
simply by the user. The electrical connection is made at the rear of
the instrument, via plug-in screw terminals.
|
