JUMO
More than sensors+automation
Home Products Control Electronic Overview
Overview
Fixed value or program controller
2 parameter blocks
Autotuning
Setpoint changeover (4 setpoint values)
Ramp function
Timer function
4 limit value monitoring functions
Service counter
Individual operator level
Separate application using structured text (ST code; option)
Math and logic function (option)
Fast wiring through PUSH IN technology
RS485 interface (option)
Additional analog and digital inputs via RS485 interface
Approval Ex II (1) G [Ex ia Ga] II C, Ex II (1) D [Ex ia Da] III C, Ex II (2) G [Ex eb Gb] IIC, Ex II (2) D [Ex tb Db] IIIC
Ignition protection type [Ex ia] with intrinsically safe inputs or [Ex e] with increased safety
Controller output (relay)
Limit value output (relay) for alarm indication
Analog output configurable as actual value output, setpoint value output, or logic output 0/10 V for control of solid state relay
LCD display for process information
USB interface on front and setup program for simple startup
Vibrant 3.5 inch color screen, with 320 × 240 pixels and 256 colors
32 programs with easy-to-use program entry and program control
Interfaces as a standard feature: USB host, USB device, RS485 (COM1)
Available as an interface (COM2): RS422/485 Modbus master/slave, PROFIBUS DP, Ethernet, PROFINET IO device
Integrated paperless recorder with tamper-proof data storage
4 individual process screens with user configurable input fields
16 math and logic functions
Flexible through modular hardware
Password-protected user administration
Five-digit analog value display
Individual operating level
Control loop and output level monitoring
Integrated timer and time switch
Service and operating hours counter
Web server for online visualization via a web browser
Alarm by email
Protection type on the front, IP66
AMS2750/CQI-9 calibration certificate
cULus, DNV GL, DIN EN14597 approval
48 × 48 mm, 48 × 96 mm, 96 × 96 mm formats
Two-state/three-state, continuous controller
Up to 5 outputs
Autotuning for exact PID control
RS485 interface (Modbus RTU)
Ramp and timer function
Firing curve for pottery kilns
48 × 48, 48 × 96, 96 × 48, 96 × 96 mm formats
Two-state/three-state continuous controller, three-step controller, continuous controller
Inputs and outputs can be expanded in a modular structure
Timer/ramp/program function
Math and logic function
Modbus and PROFIBUS DP interface
Approval DIN EN 14597
144 × 130 mm format (installation dimensions 92 × 92 mm)
5" color screen
Two-state controller, three-state controller, three-step controller, position controller, continuous controller
8 control channels
Inputs and outputs can be expanded in a modular structure
50 programs with real time clock
Math and logic functions
Recording function
Modbus and PROFIBUS DP interface
Design width 22.5 mm
Installation on DIN rail, 35 mm
Two-state/three-state controller
LCD display
Timer and ramp function
48 × 48 mm, 48 × 96 mm, 96 × 96 mm formats
2-state/3-state continuous controller, three-step continuous controller
Inputs/outputs have modular extensibility
Special functions for plastics processing machines
Math and logic function
Interface for Modbus master/slave, current 0/20 mA, PROFIBUS-DP
315 × 171 and 171 × 315 mm formats
5" color graphic display
Two-state/three-state continuous controller, three-step controller, continuous controller
4 control channels
Inputs/outputs can be expanded in a modular structure
99 programs with real-time clock
Math and logic function
Recording function
Modbus interface, PROFIBUS-DP interface
Wired ready for use
2-state controller
Pt100, Pt1000, Fe-CuNi "L" or NiCr-Ni "K"
Load circuit up to 16A
Modbus port
Setting range +1 to +10 °C
Operating mode: manual or automatic reset
Membrane heating for operation up to -15 °C
Self-monitoring of the probe line
Two analog outputs 0 to 10 V
One switching output (relay: max. AC 230 V 6(2) A)
Can be set without opening the case lid
Electrical connection via tension spring terminals
Operating voltage (SELV) AC 24 V
Design width 22.5 mm
Mounting on DIN rail 35 mm
Heating or cooling operation
LCD display
10 A relay (changeover contact)
Configuration with setup program
5 measuring input groups available
Intuitive operation and configuration on the device or with the setup program through USB interface
User level with 8 parameters
Dot matrix display 64 × 80 pixels with 4 national languages
Data logger function
Service and operating hours counter
Connection via terminal blocks with PUSH-IN technology
10 A relay (changeover contact)
Customer-specific linearization in the setup program
Limit value monitoring
Timer function
76 × 36 mm format
Heating or cooling operation
Defrosting function
Counters for operating hours and service
LCD display
Two relays
Configuration with setup program
76 × 36 mm format
Heating or cooling operation
Defrosting process electrically or with hot gas
Counters for operating hours and service
Real-time clock, Modbus interface, data logger
LCD display
Configuration with setup program
2 analog inputs for RTD temperature probes Pt100, Pt1000, KTY1X-6, or KTY2X-6 in 2-wire circuit
Available with a maximum of two 16 A relays and two 8 A relays
Optionally available with buzzer for acoustic alarm
Operating hours counter with integrated service counter
Available with data logger and RS485 interface.
Setup program to configure the device and evaluate the data logger.
Safety monitor and safety limiter for temperature, pressure, and other process variables
Configurable universal input
1oo2D architecture (two-channel structure with diagnostics channel)
Approvals according to DIN EN 14597, SIL 3, PL e
Security-related limit value relay (230 V, 3 A)
Pre-alarm absolute or adjustable as a margin from the limit value
Default actual value output
Compact solution
Ignition protection type [Ex ia] with intrinsically safe inputs or [Ex e] with increased safety
Approval II (1) (2) (3) G (b1) [Ex ia Ga] (e pz] IIC, II (1) (2) (3) D (b1) [Ex ia Da] (p Dc] IIIC, II (1) (1) (2) G (b2) [Ex ia Ga] (e py] IIC, II (1) (1) (2) D (b2) [Ex ia Da] (p DB] IIIC
Safety monitor and safety limiter for temperature, pressure, and other process variables
Configurable universal input
1oo2D architecture (2-channel structure with diagnostics channel)
Approvals according to DIN EN 14597, SIL 3, PL e
Security-related limit value relay (230 V, 3 A)
Pre-alarm absolute or adjustable as a margin from the limit value
Default actual value output
Compact solution
Ignition source monitoring according to EN 13463 and EN 50495 SIL 2
Minimum pressure monitoring SIL 2
Design width 22.5 mm
Installation on DIN rail, 35 mm
Approval according to DIN EN 14597, cULus
Universal measuring input (including standard signal)
LCD display
Configuration with setup program
