More than sensors+automation
Search

JUMO dTRANS O2 01 - transmitter / controller for dissolved oxygen (DO) with separate operating unit (202610)

Features

  • Measurement of dissolved oxygen (DO) in aqueous solutions
  • Safe 1-point calibration
  • 2-wire transmitter (for basic and standard version)
  • Electrical isolation of measurement signal (DO) and output signal (mA)
  • Easy connection to an existing system (e.g PLC)
  • Can be used as stand-alone system in maximum version
  • Compensation of temperature, atmospheric pressure and salinity
  • Further processing of the temperature of the medium is possible (separate Pt 1000
    or 2-wire transmitter)
  • Setup program for comfortable transmitter configuration / documentation
  • Easy, safe service by replacement of modules
  • Background lighting (for maximum version)

Applications

  • Communal and industrial waste water treatment plants
  • Drinking water monitoring
  • Protection of water bodies
  • Fish keeping/hatchery plants
  • Technical processing plants

Description

The JUMO dTRANS O2 01 2-wire transmitter serves to measure dissolved oxygen in watery solutions. It provides an electrically isolated output signal 4 ... 20mA according to the oxygen content. The device can be configured via a setup program or an optionally available connection and operating unit. The temperature of themedium to be measured can be detected and further processed (from the standard version also as 2-wire signal 4 ... 20mA) via a Pt 1000 in the 2-wire transmitter.
Measurements are carried out with an electrochemical probe covered by a membrane. The microprocessor circuit installed in the 2-wire transmitter considers the factors: temperature, air pressure and salinity (salt content).
The probe is designed as a module and can be easily maintained and replaced.

Documentation
Brochure
Declaration of Conformity / White Paper
Accessories

Accessory articles

Article number Product description Price / piece order
Set of replacement sensor modules (2 pcs+operating instructions)

Is calculated

Setup program with adapter for dTRANS O2 01

Is calculated

Float fitting

Is calculated

Immersion fitting, immersion tube length 500 mm

Is calculated

Immersion fitting immersion tube length 1500 mm

Is calculated

Flow-through fitting, angled seat 202850/55-964-00

Is calculated

Suspension fitting immersion tube length 500 mm

Is calculated

Suspension fitting immersion tube length 1500 mm

Is calculated

Suspension fitting immersion tube length 150 mm

Is calculated

Protection cover for AQUIS/202610 u. DigiLine hub

Is calculated

Pipe installation kit for terminal box or operating unit

Is calculated

Support pillar with pedestal base, arm and chain

Is calculated

PC interface with converter USB/TTL

Is calculated