Transmitters and controllers for redox

The redox value provides information about the oxidation and disinfection power of (chlorinated) water. This way, the redox potential is used to measure the ratio of disinfection as well as organic substances and therefore the water quality. Transmitters from JUMO ensure reliable redox measurement in relation to pH value and temperature.

  • Product selection guide

Transmitters and controllers for redox

Filter
1
Hits: 6
JUMO AQUIS touch S - Modular multichannel measuring device (liquid analysis)

JUMO AQUIS touch S

Modular multichannel measuring device (liquid analysis) Basic type: 202581
The product is intended as a platform for measuring, controlling, recording, and displaying the pH value/redox, electrolytic conductivity, high-purified water resistance, temperature, disinfection measurands (such as free chlorine, total chlorine, chlorine dioxide, ozone, hydrogen peroxide, and peracetic acid), and the totalized flow rate.
  • Wall-surface-mounted housing
  • 4 analysis sensors and 21 measuring signals
  • P, PI, PD, and PID behavior
JUMO AQUIS touch P - Modular multichannel measuring device (liquid analysis)

JUMO AQUIS touch P

Modular multichannel measuring device (liquid analysis) Basic type: 202580
The product is intended as a platform for measuring, controlling, recording, and displaying the pH value/redox, electrolytic conductivity, high-purified water resistance, temperature, disinfection measurands (such as free chlorine, total chlorine, chlorine dioxide, ozone, hydrogen peroxide, and peracetic acid), and the totalized flow rate.
  • Panel built-in device
  • 2 analysis sensors and 15 measuring signals
  • P, PI, PD, and PID behavior
JUMO digiLine pH/ORP/T - Digital or analog interface for pH/ORP/T

JUMO digiLine pH/ORP/T

Digital or analog interface for pH/ORP/T Basic type: 202705
This transmitter permits transmission of the measured value from the sensor to the measuring or automation device via digital bus communication or as an analog signal. The digital device version of the transmitter has a 5-pole M12 plug connection – the analog version an 8-pole one.
  • For pH, redox, and temperature
  • M12 plug connection
  • Analog or digital output
JUMO ecoTRANS pH 03 - Transmitter and switching device for pH, redox, and temperature

JUMO ecoTRANS pH 03

Transmitter and switching device for pH, redox, and temperature Basic type: 202723
Depending on its configuration, the device measures and controls the pH value or the redox potential in aqueous solutions. Typical application areas include general water and wastewater management, the measuring of drinking water and wastewater, process water, surface water, and seawater.
  • For pH, redox, and temperature
  • 2 user configurable analog outputs
  • DIN-rail mounting
JUMO AQUIS 500 pH - Transmitter and controller for pH value

JUMO AQUIS 500 pH

Transmitter and controller for pH value Basic type: 202560
The product controls and acquires the pH and redox value, the ammonia concentration, and temperatures. The modular structure adapts to the requirements of the application. Up to 4 outputs are available.
  • Pt100/Pt1000/NTC/PTC
  • pH-ISFET sensor connection
  • LCD graphic display
JUMO dTRANS pH 02 - Compact multichannel transmitter and controller

JUMO dTRANS pH 02

Compact multichannel transmitter and controller Basic type: 202551
The product controls and records the pH and redox values, ammonia concentrations, temperatures, and flow rates. It can be used as a two-state, three-state, three-step, or as a continuous controller (e.g. for detoxifications).
  • For pH, redox, ammonia, and temperature
  • Electrode monitoring can be activated
  • Surface or control cabinet mounting

item items, maximum number of items reached